Analysis of Na2SiO4 effect on durability of a portland cement matrix and mahogany reinforcement composite through electron microscopy

Authors

  • Inocente Bojórque Centro de Estudios de Construcción y de Arquitectura Tropical, ISPJAE, La Habana, (CUBA)
  • Jorge Acevedo Centro de Estudios de Construcción y de Arquitectura Tropical, ISPJAE, La Habana, (CUBA)
  • Raquel Valera Instituto Superior Politécnico José Antonio Echeverría, La Habana, (CUBA)

DOI:

https://doi.org/10.4067/S0718-50732007000300003

Keywords:

Scanning electron microscope, mineralizer agent, organic fibers

Abstract

Na2 SiO4 behavior as a mineralizer agent on organic fibers composites with Type I Portland Cement matrix is possible to observe it through a Scanning Electron Microscope (SEM). The purpose of this research was to study the role of this agent on this material’s durability due to the chemical incompatibility between calcium hydroxide Ca(OH)2 and the fiber reinforcement from the mahogany (Swietenia Macrophylla), from composites of three different ages and two different fiber volumetric fraction as well. The tests were made in three different zones: matrix, reinforcement and transition zone, using a SEM, whereas the chemical composition was scanned out with an Energy Disperse X-Ray Spectrometer (EDS); through the first equipment the contrast between the different phases was observed; with the second one, the chemical composition of the regions of interest was analyzed. The results showed usefulness of the agent in improving the material durability, as well as the benefits of the use of SEM to visualize the microstructural behavior.

Published

2020-07-02

How to Cite

Bojórque, I., Acevedo, J., & Valera, R. (2020). Analysis of Na2SiO4 effect on durability of a portland cement matrix and mahogany reinforcement composite through electron microscopy. Revista Ingeniería De Construcción, 22(3), 165–172. https://doi.org/10.4067/S0718-50732007000300003

Issue

Section

Original Research

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.