Development of hybrid steel-basalt fiber reinforced concrete – in aspects of flexure, fracture and microstructure

Authors

  • J. Vinotha Jenifer Department of Civil Engineering, Thiagarajar College of Engineering, 625015, Madurai (India)
  • D. Brindha Department of Civil Engineering, Thiagarajar College of Engineering, 625015, Madurai (India)

DOI:

https://doi.org/10.7764/RDLC.20.1.62

Keywords:

copper slag, steel fibers, basalt fibers, fracture, toughness, SEM, EDX, hybridization

Abstract

The conventional concrete is considered to be critical in various constructional applications due to its setbacks such as service load failures, brittle property, low ductility and low tensile capacity. Apart from the natural bridging mechanism (aggregate bridging), an additional bridging mechanism is necessary to overcome the existing setbacks in plain cement concrete. Thus concrete with one or more types of fibers in suitable combinations can augment the mechanical performance of concrete causing a positive synergy effect. Along with the two control mixes with and without copper slag as partial replacement of fine aggregate, two different groups of hybrid combination of fibers such as steel and basalt were cast with 3 different groups of coarse aggregate proportions of sizes 20 mm and 12.5 mm. The hybridization of fibers is assessed in this study under compression, tension, flexure and fracture. Stress-strain data were recorded under compression to validate the strain capacity of the mixtures. The mechanical properties were analyzed for the positive hybrid effect and the influencing factors were copper slag, hybrid fiber combination and coarse aggregate proportions. The optimum volume fraction of fibers and mix proportions were highlighted based on various behaviors of concrete. Steel as macro fibers and basalt as microfibers were examined under microstructural studies (SEM and EDX). The results from the flexural toughness showcased the potential of hybrid fibers with greater energy absorption capacity ensuring the ductile property of the proposed hybrid fiber reinforced concrete.

Downloads

Download data is not yet available.

Author Biographies

J. Vinotha Jenifer , Department of Civil Engineering, Thiagarajar College of Engineering, 625015, Madurai (India)

Thiagarajar College of Engineering, Department of Civil Engineering

Madurai, 625015 (India)

vinothajenifer@gmail.com

 

D. Brindha , Department of Civil Engineering, Thiagarajar College of Engineering, 625015, Madurai (India)

Thiagarajar College of Engineering, Department of Civil Engineering

Madurai, 625015 (India)

dbciv@tce.edu

References

Abbass, W., Khan, M. I., & Mourad, S. (2018). Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete. Construction and Building Materials, 168, 556–569. https://doi.org/10.1016/j.conbuildmat.2018.02.164

Afroughsabet, V., Geng, G., Lin, A., Biolzi, L., Ostertag, C. P., & Monteiro, P. J. M. (2018). The influence of expansive cement on the mechanical, physical, and microstructural properties of hybrid-fiber-reinforced concrete. Cement and Concrete Composites, 96, 21-32. https://doi.org/10.1016/j.cemconcomp.2018.11.012

Al-Jabri, K. S., Al-Saidy, A. H., & Taha, R. (2011). Effect of copper slag as a fine aggregate on the properties of cement mortars and concrete. Construction and Building Materials, 25(2), 933–938. https://doi.org/10.1016/j.conbuildmat.2010.06.090

Alex, X., & Arunachalam, K. (2019). Flexural behavior of fiber reinforced lightweight concrete. Journal of Construction, 18(3), 536–544. https://doi.org/10.7764/RDLC.18.3.536

Aydın, S. (2013). Effects of fiber strength on fracture characteristics of normal and high strength concrete. Periodica Polytechnica Civil Engineering, 57(2), 191–200. https://doi.org/10.3311/PPci.7174

Ayub, T., & Khan, S. U. (2017). Finite element modelling of FRC beams containing PVA and Basalt fibres: A comparative study. In AIP Conference Proceedings (Vol. 1872, No. 1, p. 020002). AIP Publishing LLC. https://doi.org/10.1063/1.4996659

Ayub, T., Shafiq, N., & Nuruddin, M. F. (2014). Mechanical Properties of High-Performance Concrete Reinforced with Basalt Fibers. Procedia Engineering, 77, 131–139. https://doi.org/10.1016/j.proeng.2014.07.029

Banthia, N., Majdzadeh, F., Wu, J., & Bindiganavile, V. (2014). Fiber synergy in Hybrid Fiber Reinforced Concrete ( HyFRC ) in flexure and direct shear. Cement & Concrete Composites, 48, 91–97. https://doi.org/10.1016/j.cemconcomp.2013.10.018

Bentur, A., & Mindess, S. (2006). Fibre Reinforced Cementitious Composites. Boca Ratón, United States: Crc Press.

Bhosale, A., Rasheed, M. A., Prakash, S. S., & Raju, G. (2019). A study on the efficiency of steel vs . synthetic vs . hybrid fibers on fracture behavior of concrete in flexure using acoustic emission. Construction and Building Materials, 199, 256–268. https://doi.org/10.1016/j.conbuildmat.2018.12.011

Branston, J., Das, S., Kenno, S. Y., & Taylor, C. (2016). Mechanical behaviour of basalt fibre reinforced concrete. Construction and Building Materials, 124, 878–886. https://doi.org/10.1016/j.conbuildmat.2016.08.009

Walton, P. L., & Majumdar, A. J. (1975). Cement-based composites with mixtures of different types of fibres. Composites, 6(5), 209-216.

Cao, M., Xie, C., & Guan, J. (2019). Fracture Behavior of Cement Mortar Reinforced by Hybrid Composite Fiber Consisting of CaCO 3 Whiskers and PVA-Steel. Composites Part A: Applied Science and Manufacturing, 120, 172-187. https://doi.org/10.1016/j.compositesa.2019.03.002

Cattaneo, S., & Biolzi, L. (2010). Assessment of thermal damage in hybrid fiber-reinforced concrete. Journal of materials in civil engineering, 22(9), 836-845.

Chakrawarthi, V., Darmar, B., & Elangovan, A. (2016). Copper slag concrete admixed with polypropylene fibres. Građevinar, 68(2), 95-104.

Chun, B., & Yoo, D. (2018). Hybrid effect of macro and micro steel fibers on the pullout and tensile behaviors of ultra-high-performance concrete. Composites Part B: Engineering, 162, 344-360. https://doi.org/10.1016/j.compositesb.2018.11.026

Correal, J. F., Herrán, C. A., Carrillo, J., Reyes, J. C., & Hermida, G. (2018). Performance of hybrid fiber-reinforced concrete for low-rise housing with thin walls. Construction and Building Materials, 185, 519–529. https://doi.org/10.1016/j.conbuildmat.2018.07.048

Dawood, E. T., Mohammad, Y. Z., Abbas, W. A., & Mannan, M. A. (2018). Toughness , elasticity and physical properties for the evaluation of foamed concrete reinforced with hybrid fi bers, Heliyon, 4(12), e01103. https://doi.org/10.1016/j.heliyon.2018.e01103

Qu, S., & Lin, S. (2012). Civil Engineering and Urban Planning 2012. International Conference On Civil Engineering And Urban Planning. Yantai University, Yantai, China, August 18-20, 2020.

Erden, S., & Ho, K. (2017). 3 – Fiber reinforced composites. Fiber Technology for Fiber-Reinforced Composites. (pp. 51–79). Izmir, Turkey: Woodhead Publishing. https://doi.org/10.1016/B978-0-08-101871-2.00003-5

Lee, S. F., & Jacobsen, S. (2011). Study of interfacial microstructure, fracture energy, compressive energy and debonding load of steel fiber-reinforced mortar. Materials and structures, 44(8), 1451-1465.

Guler, S. (2018). The effect of polyamide fibers on the strength and toughness properties of structural lightweight aggregate concrete. Construction and Building Materials, 173, 394–402. https://doi.org/10.1016/j.conbuildmat.2018.03.212

Guler, S., Yavuz, D., Korkut, F., & Ashour, A. (2019). Strength prediction models for steel, synthetic, and hybrid fiber reinforced concretes. Structural Concrete, 20(1), 428-445. https://doi.org/10.1002/suco.201800088

Hillerborg, A., Modéer, M., & Petersson, P. E. (1976). Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and concrete research, 6(6), 773-781.

Holschemacher, K., Mueller, T., & Ribakov, Y. (2010). Effect of steel fibres on mechanical properties of high-strength concrete. Materials and Design, 31(5), 2604–2615. https://doi.org/10.1016/j.matdes.2009.11.025

Jebadurai, S. V. S., Tensing, D., Hemalatha, G., & Siva, R. (2018). Experimental investigation of toughness enhancement in cement mortar. International Journal of Engineering, 31(11), 1824-1829. https://doi.org/10.5829/ije.2018.31.11b.04

Jiang, C., Fan, K., Wu, F., & Chen, D. (2014). Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete. Materials & Design, 58, 187–193. https://doi.org/10.1016/J.MATDES.2014.01.056

Jiao, H., Wu, Y., Chen, X., & Yang, Y. (2019). Flexural toughness of basalt fibre-reinforced shotcrete and industrial-scale testing. Advances in Materials Science and Engineering, Volume 2019, 1-8. https://doi.org/10.1155/2019/6568057

John, V. J., & Dharmar, B. (2020). Effect of steel macro fibers on engineering properties of copperslag‐concrete. Structural Concrete, 21(2), 689-702. https://doi.org/10.1002/suco.201900109

Kabay, N. (2014). Abrasion resistance and fracture energy of concretes with basalt fiber. Construction and Building Materials, 50, 95–101. https://doi.org/10.1016/j.conbuildmat.2013.09.040

Karahan, O. (2020). Resistance of polypropylene fibered mortar to elevated temperature under different cooling regimes. Journal of Construction, 18(2), 386–397. https://doi.org/10.7764/RDLC.18.2.386

Khan, M., Cao, M., & Ali, M. (2018). Effect of basalt fibers on mechanical properties of calcium carbonate whisker-steel fiber reinforced concrete. Construction and Building Materials, 192, 742–753. https://doi.org/10.1016/j.conbuildmat.2018.10.159

Kim, D., Naaman, A., Eltawil, S. (2008). Comparative Flexural Behavior of Four Fiber Reinforced Cementitious Composites. Cement and Concrete Composites, 30(10), 917–928.

Kizilkanat, A. B., Kabay, N., Akyüncü, V., Chowdhury, S., & Akça, A. H. (2015). Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete : An experimental study. Construction & Building Materials, 100, 218–224. https://doi.org/10.1016/j.conbuildmat.2015.10.006

Koniki, S., & Prasad, D. R. (2019). Influence of hybrid fibres on strength and stress-strain behaviour of concrete under uni-axial stresses. Construction and Building Materials, 207, 238–248. https://doi.org/10.1016/j.conbuildmat.2019.02.113

Dash, M. K., Patro, S. K., & Rath, A. K. (2016). Sustainable use of industrial-waste as partial replacement of fine aggregate for preparation of concrete–A review. International Journal of Sustainable Built Environment, 5(2), 484-516.

Li, B., Chi, Y., Xu, L., Shi, Y., & Li, C. (2018). Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete. Construction and Building Materials, 191, 80–94. https://doi.org/10.1016/j.conbuildmat.2018.09.202

Mehta, P. K., & Monteiro, P. J. (2014). Concrete: microstructure, properties, and materials. McGraw-Hill Education.

Mobasher, B., Yao, Y., & Soranakom, C. (2015). Analytical solutions for flexural design of hybrid steel fiber reinforced concrete beams. Engineering Structures, 100, 164–177. https://doi.org/10.1016/j.engstruct.2015.06.006

Murari, K., Siddique, R., & Jain, K. K. (2014). Use of waste copper slag, a sustainable material. Journal of Material Cycles and Waste Management, 17(1), 13–26. https://doi.org/10.1007/s10163-014-0254-x

Nataraja, M. C., Dhang, N., & Gupta, A. P. (1999). Stress–strain curves for steel-fiber reinforced concrete under compression. Cement and concrete composites, 21(5-6), 383-390.

Qian, C., & Stroeven, P. (2000). Fracture properties of concrete reinforced with steel–polypropylene hybrid fibres. Cement and Concrete Composites, 22(5), 343-351.

Qian, C. X., & Stroeven, P. (2000). Development of hybrid polypropylene-steel fibre-reinforced concrete. Cement and Concrete Research, 30(1), 63–69. https://doi.org/10.1016/S0008-8846(99)00202-1

Tixier, R., Devaguptapu, R., & Mobasher, B. (1997). The effect of copper slag on the hydration and mechanical properties of cementitious mixtures. Cement and Concrete Research, 27(10), 1569-1580.

Richardson, I. G. (2004). Tobermorite/jennite-and tobermorite/calcium hydroxide-based models for the structure of CSH: applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, Portland cement, and blends of Portland cement with blast-furnace slag, metakaolin, or silica fume. Cement and Concrete Research, 34(9), 1733-1777. https://doi.org/10.1016/j.cemconres.2004.05.034

Sahoo, D. R., Solanki, A., & Kumar, A. (2015). Influence of steel and polypropylene fibers on flexural behavior of RC beams. Journal of Materials in Civil Engineering, 27(8), 04014232. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001193.

Saidani, M., Saraireh, D., & Gerges, M. (2016). Behaviour of different types of fibre reinforced concrete without admixture. Engineering Structures, 113, 328-334. https://doi.org/10.1016/j.engstruct.2016.01.041

Shafiq, N., Ayub, T., & Ullah, S. (2016). Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. Composite Structures, 153, 30–41. https://doi.org/10.1016/j.compstruct.2016.06.008

Shi, C., Meyer, C., & Behnood, A. (2008). Utilization of copper slag in cement and concrete. Resources, Conservation and recycling, 52(10), 1115-1120. https://doi.org/10.1016/j.resconrec.2008.06.008

Jalasutram, S., Sahoo, D., & V. M. (2016). Experimental investigation on mechanical properties of basalt fibre-reinforced concrete. Structural Concrete, 18(2), 292–302. https://doi.org/10.1002/suco.201500216

Sun, L., Hao, Q., Zhao, J., Wu, D., & Yang, F. (2018). Stress strain behavior of hybrid steel-PVA fiber reinforced cementitious composites under uniaxial compression. Construction and Building Materials, 188, 349–360. https://doi.org/10.1016/j.conbuildmat.2018.08.128

Jamshaid, H., & Mishra, R. (2016). A green material from rock: basalt fiber–a review. The Journal of The Textile Institute, 107(7), 923-937. https://doi.org/10.1080/00405000.2015.1071940

Teng, S., Afroughsabet, V., & Ostertag, C. P. (2018). Flexural behavior and durability properties of high performance hybrid-fiber-reinforced concrete. Construction and Building Materials, 182, 504–515. https://doi.org/10.1016/j.conbuildmat.2018.06.158

Wang, D., Ju, Y., Shen, H., & Xu, L. (2019). Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber. Construction and Building Materials, 197, 464–473. https://doi.org/10.1016/j.conbuildmat.2018.11.181

Wu, W., Zhang, W., & Ma, G. (2010). Optimum content of copper slag as a fine aggregate in high strength concrete. Materials and Design, 31(6), 2878–2883. https://doi.org/10.1016/j.matdes.2009.12.037

Yap, S. P., Alengaram, U. J., & Jumaat, M. Z. (2016). The effect of aspect ratio and volume fraction on mechanical properties of steel fibre-reinforced oil palm shell concrete. Journal of Civil Engineering and Management, 22(2), 168-177. https://doi.org/10.3846/13923730.2014.897970

Yurtseven, A. E., Yaman, I. O., & Tokyay, M. U. S. T. A. F. A. (2006). Mechanical properties of hybrid fiber reinforced concrete. In Measuring, Monitoring and Modeling Concrete Properties (pp. 207-214). Springer, Dordrecht.

Zhang, H., Wang, L., Bai, L., Addae, M., & Neupane, A. (2019). Research on the impact response and model of hybrid basalt-macro synthetic polypropylene fiber reinforced concrete. Construction and Building Materials, 204, 303–316. https://doi.org/10.1016/j.conbuildmat.2019.01.201

Zhang, L., Liu, J., Liu, J., Zhang, Q., & Han, F. (2018). Effect of steel fiber on flexural toughness and fracture mechanics behavior of ultrahigh-performance concrete with coarse aggregate. Journal of Materials in Civil Engineering, 30(12), 04018323. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002519.

Zhu, X. K., & Joyce, J. A. (2012). Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization. Engineering Fracture Mechanics, 85, 1-46. https://doi.org/10.1016/j.engfracmech.2012.02.001

Downloads

Published

2021-04-21

How to Cite

Jenifer , J. V., & Brindha , D. . (2021). Development of hybrid steel-basalt fiber reinforced concrete – in aspects of flexure, fracture and microstructure . Revista De La Construcción. Journal of Construction, 20(1), 62–90. https://doi.org/10.7764/RDLC.20.1.62