Thermal modification of most representative Portuguese wood species. A preliminary study

Authors

  • João C. Costa  University of Minho (Portugal)
  • Jorge M. Branco  University of Minho (Portugal)
  • Aires F. Camões

DOI:

https://doi.org/10.7764/RDLC.18.3.488

Keywords:

Thermal modification, experimental evaluation, strength, dimensional stability

Abstract

The thermal modification has proved to be an effective method to improve the durability of wood elements. Until now, most applications of thermally modified wood have been limited to non-structural applications since the wood’s heat treatment leads to a significant reduction in mechanical performances. However, there is no knowledge about these treatments applied on the wood species more used in Portuguese constructions. In order to evaluate the effect of heat treatment on the wood species of Maritime pine (Pinus pinaster), Eucalyptus (Eucalyptus globulus), Beech (Fagus sylvatica), Acacia (Acacia melanoxylon) and Oak (Quercus faginea), an experimental program consisted of mechanical bending tests and dimensional stability tests (shrinkage, swelling and equilibrium moisture content) was defined. For comparison purposes, all tests were made with test specimens of non-modified and thermally modified wood using four temperature values (200ºC, 240ºC, 260ºC and 300ºC) and three exposed periods (2, 4 and 8 hours). The obtained results show that the behaviour of the studied experimented species was similar to the one of other species already studied in the available literature. It was possible to point out that mechanical properties decrease with the severity of the thermal treatment, while the dimensional stability improved.

Downloads

Download data is not yet available.

Author Biographies

João C. Costa , University of Minho (Portugal)

Institute for sustainability and Innovation in Structural Engineering (ISISE)
Department of Civil Engineering, University of Minho
4800-058 Guimarães (Portugal)
jcosta.engcivil@gmail.com

Jorge M. Branco , University of Minho (Portugal)

 ISISE, Department of Civil Engineering, University of Minho
4800-058 Guimarães (Portugal)
jbranco@civil.uminho.pt

Aires F. Camões

CTAC, Department of Civil Engineering, University of Minho
4800-058 Guimarães (Portugal)
aires@civil.uminho.pt

Downloads

Published

2019-12-31

How to Cite

Costa , J. C., Branco , J. M., & Camões, A. F. (2019). Thermal modification of most representative Portuguese wood species. A preliminary study. Revista De La Construcción. Journal of Construction, 18(3), 488–500. https://doi.org/10.7764/RDLC.18.3.488